KEYENCE
CA-DQP12X
Pattern projection lighting 125 mm type
Specifications:
Model | CA-DQP12X |
Illumination method | Block lighting format Pattern projection technique emitter/ profile image emitter/ LumiTraxTM emitter/normal light emission Fixed current control mode (1024 shade digital) |
Response speed | 1 ms or under |
Pattern projection light source | Colour | White |
Number of LEDs | 72 |
Repeatability | 0.1 mm or lower (Reference value) *1 |
Reference distance | 125 mm |
Recommended measurement range (XY) | 125 × 125 mm |
Recommended measurement range (Z) | 100 to 150 mm |
LumiTraxTM light source | Colour | White |
Number of LEDs | 36 |
Dimension | 166 × 166 × 48.8 mm (not including connectors) |
Dimension | Inner Diameter | 64.7 mm |
Controller Connection | I/F | 12-pin round connector (dedicated cable) |
Cable | Dedicated cable (3 m/5 m/10 m), maximum 30 m (with extension cable*2) |
Illumination Expansion Unit | CA-DC60E |
Connection with External Power Supply | I/F | - |
Cable |
Power voltage |
Power consumption | 36.0 W (current consumption: 1.5 A) |
Environmental resistance | Ambient temperature | 0 to +40°C*3 |
Relative humidity | 85% RH or less (no condensation) |
Weight | Approx. 0.8 kg |
*1 Varies with camera, lens, setup conditions, and measurement conditions. *2 A maximum of two extension cables may be connected to a dedicated cable. *3 Conduct warmup at 10°C or below. As a guideline, warmup is about 10 minutes for the CA-DQP12X, and about 20 minutes for the CA-DQP25X. |