ESCO EA315SK-1. Product name: Single-phase 100・200V inverter pulse TIG welding machine

Input voltage

Single phase 100/200V

Usage rate

TIG welding: 25%
Hand stick welding: 25%

Output current

TIG welding: 110A (100V), 200A (200V)
Hand rod welding: 70A (100V), 170A (200V)

Frequency

50/60 Hz

Input

TIG welding: 2.12kVA (100V), 4.6kVA(200V)
Hand rod welding: 2.04kVA (100V), 5.6kVA (200V)

No-load voltage

When TIG welding: 20V
When welding with a hand stick: 90V

Body size

150(W)×390(D)×282(H)mm

Weight

8.3 kg

Accessories

TIG torch 150A about 8m
Holder cord for hand stick welding about 2m
Earth clip cord about 3m
Argon flow meter
Gas hose 3m
Horse band x 2 pieces
1 torch consumable set (torch cap long/short, nozzle #5/#6, collet 1.6/2.4, collet body 1.6/2.4, tungsten electrode rod with cerium φ1.6/φ2.4)

Applicable tungsten electrode

φ1.6 and φ2.4

Applicable TIG connection rod

Tungsten electrode rod with cerium
Tungsten electrode rod with thorium

Applicable material

Iron, stainless steel, casting

Weldable plate thickness

Iron: TIG: 0.8~4.5/MMA: 1.2~8mm
Stainless steel: TIG: 0.8~4.5/MMA: 1.2~6mm
Casting: 0.8~4.5mm

Welding method/mode

TIG welding and high-frequency start
TIG welding, high-frequency start, pulse
TIG welding and lift start
TIG welding, lift start, pulse
Hand stick welding and lightning protection ON
Hand stick welding and lightning protection OFF

Pre-flow/after-flow

Pre-flow: High-frequency start: 0.5 seconds, lift start: up to 2 seconds
Afterflow: 5 seconds for both high frequency and lift start

Up/down slope

When the torch switch self-retention IS ON: 2.5 x current value -10 (mm seconds)
When the torch switch self-retention IS OFF: None

Code length

Earth clip cord: 3.0m
Torch cord for TIG: 8.0m
Holder code: 2.0m
Power cord 3.0m

[This welding machine is a Class A device that is considered an industrial environment based on the technical standards of the Electrical Appliance Safety Act. When used in the home environment, it may cause electromagnetic interference (TV and radio reception problems, computer screen disturbances, etc.). In that case, please take appropriate measures (stop simultaneous use, connect ground, avoid sharing outlets, keep devices away from each other, etc.).]

Small and lightweight DC pulse TIG welding machine.

With simple operation settings, both TIG welding and hand welding can be used.

With TIG welding pulse function (4-stage switching: 2Hz, 5Hz, 10Hz, 20Hz)

It supports two types of start methods, high-frequency start and lift start, and the pulse function can be used in both methods.

It is possible to easily start DC TIG welding without having to set cumbersome parameters.

The output current is controlled by inverter control, improving the welding quality, and making it easier to maintain a stable bead shape.

It has functions that support welding, such as the over-use rate prevention function, the memory function (retains settings other than the previous welding current adjustment dial when the power is turned on), the lightning strike prevention function (only when welding with a hand stick), and the arc force function (only when welding with a hand stick). Mas.

The PFC (Power Coefficient Improvement) function makes the input power small and works effectively against voltage drops.

※Aluminum cannot be welded with a direct current machine.