HORIBA
CS-620F
Optical Fiber Type Hot Phosphoric Acid Concentration Monitor
Specifications:
Model | CS-620F |
Measurement principle | Absorption spectroscopic method |
Calculation principle | Temperature compensation type multivariate analysis |
Sample | H3PO4/H2O |
Measurable range Repeatability |
| Component | Measurable range (mass%) | Repeatability (mass%) | Analog output range(mass%) |
1st solution | H3PO4 | 85.00-92.00 | +/-0.10 | 85.00-100.00 |
H2O | 8.0-15.0 | +/-0.3 | 0.0-15.0 |
・ Repeatability is defined by maximum error from average (1 hour). ・ In the case of low temperature measurement (140°C) and high temperature measurement (170°C) with the same chemical, there is possibility of discrepancy (Maximum +/- 0.30%). |
Conditions of Measurement | 1) Measurement interval: Approx. 3 sec. (minimum) 2) Moving average: 16 times |
Connection fitting size | 1 inch or 3/4 inch |
Sample condition | Sample temperature: 140 to 170°C Atmospheric temperature, Chemical temperature fluctuation: within +/- 1°C (period of time : 1 hour) Input pressure: 0.2 MPa or less Pressure fluctuation: 0.02 MPa or less Flow rate: 1 to 30 L/min |
Air(for operation and purge) | Connection port: 4 mm O.D. quick joint Pressure: 0.2 MPa ± 0.02 MPa |
Power source | 100 to 230 V AC (Single-Phase), 50/60 Hz |
Power consumption | Approx.85 VA (Transient electric current at the time of the start is excluded) |
Communication | Parallel I/O, RS-232C, Analog output |
Dimension | (Monitor) 200 (W) × 308 (D) × 78 (H) mm (Lamp unit) 200 (W) × 262 (D) × 100 (H) mm (Sample cell) 240 (W) × 209 (D) × 205 (H) mm |
Weight | (Monitor) Approx.3.6 kg (Lamp unit) Approx.2.8 kg (Sample cell) Approx.3.0 kg |