HORIBA
GX-100*¹
Modular Water Supply Quality Monitor
Specifications:
Product name | Modular Water Supply Quality Monitor |
Model | GX-100 |
Measurement items | Turbidity, color, free residual chlorine, water pressure, pH, conductivity, water temperature (Flow rate can also be selected and displayed (reference value)) *The measurement subject is tap water whose measurement item values are within the ranges stipulated in the Japanese drinking water testing method. |
Measurement method | Refer to Table 1 |
Measurement range | Refer to Table 1 |
Repeatability | Refer to Table 1 |
Display method | i)Display of each component by LCD on the interface module ii)PC display and operation is also possible via USB connection (*) iii)Display and operation on mobile devices is also possible via Bluetooth®connection (*) *A dedicated app is required. Up to eight items (including flow rate) can be displayed simultaneously. |
Calibration method | Refer to Table 1 |
Automatic zero calibration | (Turbidity, color, free residual chlorine) Calibration method: Filtered water sample Calibration Start method: Calibration starts with an internal timer and Modbus®communication Calibration period: 1 to 9999 hours (arbitrary setting) Calibration time: 20 minutes |
Automatic drainage | Start method: Drainage starts with an internal timer and Modbus®communication Drainage period: 1 to 9999 hours (arbitrary setting) Drain count: 1 to 9 times (arbitrary setting) Drain time: 9 to 45 minutes |
Cleaning method | Turbidity, color: Continuous cleaning of cell window with wiper Free residual chlorine: Continuous cleaning with beads |
Sample water conditions | Temperature: 0 to 40℃ (should not be frozen) Pressure: 0.1 to 0.75 MPa Conductivity: 100 μS/cm or more Amount introduced into the analysis section (flow rate): 80 to 100 mL/min ・When test-running, be sure to flush the instruments thoroughly before passing water through them. ・Be sure to provide a bypass for the piping leading to the instrument. ・If there is a risk of the sample water freezing, take measures by using insulation and heat retention device. ・Water samples measured with this device cannot be used for distribution. ・To keep the flow rate stable, avoid sudden fluctuations in water pressure. |