KEYENCEAP-33AMain Unit, Positive-pressure Type, 1 Mpa, NPNSpecifications:ModelAP-33ATypePositive pressure, NPNRated pressure0 to 1.000 MPaFluid typeAir or non-corrosive gasesType of pressureGauge pres
KEYENCE
AP-33A
Main Unit, Positive-pressure Type, 1 Mpa, NPN
Specifications:
Model | AP-33A | |
Type | Positive pressure, NPN | |
Rated pressure | 0 to 1.000 MPa | |
Fluid type | Air or non-corrosive gases | |
Type of pressure | Gauge pressure | |
Display | 3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm) | |
Display resolution | 0.01 bar, 0.2 Psi, 0.001 MPa, 0.01 kgf/cm2 | |
Detectable pressure range | -15 to +110 % of F.S. | |
Hysteresis | Variable (when hysteresis mode is selected), 0.5 % of F.S. in standard mode | |
Response time (Chattering prevention function) | 2.5/5/100/500 ms (selectable) | |
I/O | Analogue output | 1 to 5 V (Load impedance: 47 kΩ min.) |
Control output | NPN open collector: 100 mA max. (40 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable) | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | 50 mA (at 24 V) or less, 90 mA (at 12 V) or less | |
Environmental resistance | Pressure resistance | 1.5 MPa (15 bar) |
Ambient temperature | 0 to +50 °C (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, | |
Weight | Approx. 120 g | |