HORIBASLFA-6000X-ray Fluorescence Sulfur-in-Oil AnalyzerSpecifications:Measurement principleX-ray Fluorescence Analysis MethodMeasurement sampleSulfur in petroleum products such as heavy oil, naphtha,
HORIBA
SLFA-6000
X-ray Fluorescence Sulfur-in-Oil Analyzer
Specifications:
Measurement principle | X-ray Fluorescence Analysis Method |
Measurement sample | Sulfur in petroleum products such as heavy oil, naphtha, crude oil and light oil |
Measurement range | 5 ppm - 9.9999 % |
Repeatability | 5 ppm or less with a 1% sulfur sample, 1.6 ppm or less with a 0% sulfur sample |
C/H error correction | ± 50 ppm or less per C/H (with a 1 % sulfur sample) |
Lower detection limit | 5 ppm or less * * 3 times the standard deviation with a 0% sample |
Number of calibration curves | Up to 15 calibration curves |
Calibration curve order | Linear or Quadratic (both automatic selection and manual settings are available) |
Amount and number of samples | 4 - 10 mL, 1 sample(SLFA-6100) 4 - 10 mL, 8 samples(SLFA-6800) |
Measurement time | 10 - 600 sec |
Data output | Printout, USB memory stick, USB cable connected to PC |
Spectrum measurement | Energy Range: 0 - 10 keV, spectrum analysis to verify instrument performances |
Operating temperature | + 5 ˚C to + 40 ˚C (+ 41 ˚F to 104 ˚F) |
Operating humidity | 80% max relative humidity in temperature range |
Power supply | AC 100 - 240 V +/- 10%, 50/60 Hz |
Power consumption | 150 VA |
Dimentions | 403 x 468 x 210 mm |
Weight | Approx. 21 kg (SLFA-6100) |