ESCO EA813PB-53. DC10.8V/2.0Ah Screwdriver Drill Set (Red/Rechargeable)

Specification

Set

Maximum torque

High speed about 6N・m
Low speed about 18N・m

Chuck

One-touch bit lock method (the dimensions up to the step are 13mm)

Battery

10.8V (Lithium-ion battery 2.0Ah)

Charger

Charging status display
Charger and battery pack abnormal display
Cooling and charging function
Power supply: AC100V 50/60Hz
Power consumption: 60W
Weight: 640g

Charging time

Practical charging: about 25 minutes
Full charge: about 45 minutes

Number of revolutions

[High speed] 0 to 1550 revolutions/minute,
[Low speed] 0 to 400 revolutions/minute

Size

128 x 68 x 219 mm

Weight

1.05 kg

Clutch

15 stages

Accessories

EZ9K01: Plastic case
EZ7L10A: Fast charger (for lithium-ion only)
EZ8L1020FA: Battery pack 10.8V2.0Ah (LF type) (2 pieces)

Work range (mm)

Wood screws (Yonematsu): φ2.1~6.8
Tex (Vs. SPC, thickness 2.3mm): φ3.5 to φ6
Machine screw: M3 to M5
Woodworking (Taimi Matsu, thickness 120mm): ~φ21
Metalwork (twi-iron plate, thickness 2.3mm): ~φ10
Metalwork hole saw (for SPC, thickness 2.3mm): ~φ21

Ability (approximate and fully charged)

Screw tightening: "High-speed mode" wood screws and Yonematsu (Φ4.1 x 25mm) about 440 pieces, "High-speed mode" Tex screws and SPC (Φ4 x 13mm, plate thickness 1.6mm) about 310 pieces
Drilling: "Low-speed mode" metalworking hole saw, SPC (Φ20 x 1.6mm) about 14 holes, "High-speed mode" woodworking, Yonematsu (Φ15 x 20mm) about 210 holes, "low speed mode" universal hole saw, plasterboard (Φ100×12.5mm) ) About 100 holes, "low speed mode" universal hole saw Keical plate (Φ100 x 6mm) about 35 holes