HEIDON TYPE:17 Adhesion and Peeling Resistance Tester

HEIDON

TYPE:17

Adhesion and Peeling Resistance Tester

Specifications:

Travel Speed

Clamp Moving Speed: 50-500mm/min
(Because both clamps move at the same speed in opposite directions, the measurement speed will be 100-1000mm/min.)

Travel Distance

Each clamp 150mm

Measurement Range

Possible to use both 0-100gf and 0-2000gf loading converters

Test Sample Dimensions

Maximum 200mm x 75mm

Safety Equipment

Overloading Safety Equipment (Overload)
High Frequency Noise Prevention Circuit CMRR: AC/DC130dB or greater,
NMRR: AC50dB or greater

Dynamic Strain Amplifier

Zero Point Adjustment: Digital Servo Auto Zero Reset Method
Output (Non-linear): ±5V (±0.05% FS or less)
Sensitivity Switching: 0, 100, 50, 25, 10% FS
SN Ratio: 60dB (Maximum sensitivity)
Response Frequency Characteristics: 2kHz/-3dB
Filter: 1, 10, 100Hz, Pass (Low pass filter)
(The dynamic strain amplifier is incorporated in the main unit)

Supported Standards

JIS P8139

Usage Environment

0-50℃ RH85% or less, non-condensing

Power Supply

AC100V 50/60Hz

Overall Dimensions

Main Unit: W630mm x D310mm x H350mm

Standard Accessories

Loading Converter 1 unit, Relay Cable 1m, Power Cable (2P with E, 2m) 1 piece,
Acrylic Cover 1 piece, Tools 1 set, Parts Case 1 unit, Operation Manual 1 book