SONIC
μLF-300S
Ultrasonic Liquid Flow Meter
Specification:
■Ultrasonic Liquid Flowmeter μLF Series
μLF-300S
Model | μLF-300S(converter) + μLT8I/μLT-4I (sensor) |
Measurement method | Ultrasonic transit time method |
Applicable liquid | Water, Aqueous solution, Oil, Chemical liquid ※Please be advised that if not used for water. |
Liquid temperature | 15℃~80℃ (Please check case of 60°C over in advance) |
Liquid pressure | less than 0.5MPa |
Fluid kinematic viscosity | less than 100mm^2/sec |
Measurering range | 0 ml/min ~ 1000 ml/min (μLF-300S + μLT-8I) 0 ml/min ~ 4000 ml/min (μLF-300S + μLT-4I) |
Accuracy (Water at room temperature) | ±0.5%RD (1/8 inch : 200 ~ 1000ml/min) ±1ml/min (1/8 inch : 0 ~ 199ml/min) ±0.5%RD (1/4 inch : 800 ~ 4000ml/min) ±4ml/min (1/4 inch : 0 ~ 799ml/min) |
Reproducibility | ±0.2% (Liquid tempperature ±0.5℃、30sec averaging) |
Power supply | DC 24V ±10% |
Power consumption | less than 3.6W |
Weight | Converter 240g, Sensor 70g |
Sensor |
Pipe material | PFA |
Nominal diameter | 1/8 inch OD: 3.17mm, ID: 2.17mm, 1/4 inch OD: 6.35mm, ID: 4.35mm |
Protection rating | Equivalent to IP65 |
Cable | Standard 5m |
Input/Output |
Digital output | 4 Wired RS-422, 4 Wired RS-485 |
Analog output | Erectric current output 4-20mA, load resistance less 500Ω or under |
Total flow output | Pulse output 1ch(pen collector) |
Alarm output | Pulse output 1ch(pen collector) |
Contact input | 1ch (Zero adjustment or flow integration reset) |