Brand: HAKKO
Model: HU-100/HU-101
Product Name: Auto-Soldering System/Auto-Soldering Robot System
Specification:
Soldering robot system
|
Power consumption | 290 W |
Movable range (stroke) | X axis : 400 mm Y axis : 400 mm Z axis : 150 mm θ axis : ±200 degrees |
Payload capacity | X axis : 20 kg (jig table) |
Speed | X/Y axis : 1 to 800 mm/sec. Z axis : 1 to 400 mm/sec. θ axis : 1 to 600 degrees/sec. |
Positioning repeatability | X/Y/Z axis : ±0.02 mm, θ axis : ±0.01 degree |
Drive system (motor type) | Stepping motor |
Number of program | 10 programs Max. 240 points/program |
Number of soldering condition | 100 conditions for PS (Point soldering) mode 100 conditions for DS (Drag soldering) mode |
Soldering tip | TX1 : 140 W, TX2 : 300 W |
Air | Not required |
Operating environment | Ambient temperature/humidity range 0 to 40℃, 85% or less RH (without condensation) |
Dimensions | 601 (W) × 934 (H) × 747 (D) mm |
Weight | 50 kg |
Programming software
Compatible OS | Windows 7、Windows 8/8.1、Windows 10 |
Computer and compatible keyboard | Personal computer which runs on Windows OS and its compatible keyboard |
Media reading drive | CD-ROM drive |
Supported robot | Exclusive for TTA-A4 series robot made by IAI |
USB port | Necessary to run Easy programming software |
Note | * Multiple connection methods between table-top type robot (IAI-made TTA-A4 series) and PC are available. However, when connecting to PC from the USB connector on the front side of the table-top type robot (IAI-made TTA-A4 series), it cannot be used under Windows 10 environment. * The specification of the robot is HAKKO original. Please contact HAKKO when necessary. |
Solder feed unit
Model No. | FU-500 |
Power consumption | 35 W |
Station
Usable solder diameter | 0.3, 0.5, 0.6 (0.65), 0.8, 1.0, 1.2, 1.6 mm dia. |
Dimensions | 145 (W) × 100 (H) × 230 (D) mm |
Weight | 2.3 kg |
Feeder unit
· Total length and weight are measured without cord.
· Weight of feeder unit is the maximum value which is measured with solder feed pulley unit, solder feed guide and fluoroplastic tube.
Soldering iron unit
Model No. | FU-601 |
Power consumption | 140 W / 300 W |
Temperature range | 50 to 500℃ |
Temperature stability | ±5 at idle temperature |
Station
Output power | AC 29 V |
Dimensions | 145 (W) × 107 (H) × 211 (D) mm |
Weight | 4 kg |
Soldering Iron
Power consumption | 260 W (29V) |
Tip to ground resistance | <2 Ω |
Tip to ground potential | <2 mV |
Cord length | 5 m |
Total length | 168 mm (with TX2-XD4 tip, dimension can be adjusted within a ±5 mm range.) |
Weight | 134 g (with TX2-XD4 tip) 173 g (with TX2-XD4 tip and iron unit fixing assembly) |