ESCO EA708AB-23A. Clamp meter (digital)

Direct current

600/2000A
Basic accuracy: ±1.3%rdg. ±0.3A (600A range)

AC current

1000A (maximum display 999.9A, 10Hz to 1kHz, true effective value rectification)
Basic accuracy 45-66Hz: ±1.8% rdg. ±0.3A (at30.1A-900.0A)

Crest Factor

1000A range: 1.5

AC + direct current

1000A (DC, 10Hz to 1kHz, true effective value rectification)
Basic accuracy DC, 45-66Hz: ±1.3%rdg. ±1.3A (at30.1A-900.0A)

DC power

0.000 kVA to 1000 kVA (0 kVA to 2000 kVA when using P2000) (automatically switch according to the voltage range)
Basic accuracy: ±2.0% rdg.±20dgt.

DC voltage

600 mV/6/60/600/1000V
Basic accuracy ±0.5% rdg±0.5mV

AC voltage

6/60/600/1000V (15~1kHz, true effective value rectification)
Basic accuracy 45-66Hz: ±0.9%rdg. ± ±0.003V (at 6V)

AC + DC voltage

6/60/600/1000V
Basic accuracy DC, 45-66Hz: ±1.0%rdg. ±0.013V (at6V)

Standard

CATIV 600V, CATIII 1000V
(When DC high voltage probe is installed) CATIV 1000V, CATIII 2000V

Resistance

600Ω/6/60/600kΩ/6MΩ
Basic accuracy: ±0.7%rdg. ±0.5Ω(at600Ω)

Capacitance

1μ/10μ/100μ/1000μF
Basic accuracy: ±1.9%rdg. ±0.005μF(at1μF)

Frequency

9.999Hz/99.99Hz/999.9Hz
Basic accuracy: ±0.1%rdg. ± ±0.003Hz (at9.999Hz)

Temperature

-40 to 400℃
Accuracy: ±0.5%rdg. ±3.0℃+ temperature probe accuracy addition

hanonic

[When the wireless adapter (EA708XA-1) is installed] Harmonic level up to 30th in voltage and current / content rate / overall honic distortion rate
※Can be displayed in application software (GENNECT Cross)

Function

Conduction check, diode check, AC/DC automatic discrimination, positive and negative judgment of DC current and voltage, display of maximum/minimum/average/wave high maximum/wave high minimum value, low-pass filter, display value hold, backlight, auto power saving, bu Za sound, zero adjustment

Clamp inner diameter

34 mm