ESCO EA708AB-22A. Clamp meter (digital)

AC voltage

6/60/600/1000V (15~1kHz, true effective value rectification)
Basic accuracy 45-66Hz: ±0.9%rdg. ± ±0.003V (at 6V)

DC voltage

600m/6/60/60/600/1000V
Basic accuracy: ±0.5%rdg. ±0.5mV (at 600mV)

AC + DC voltage

6/60/600/1000V
Basic accuracy DC, 45-66Hz: ±1.0%rdg. ±0.023V (at 6V)

Crest Factor

20.00A range: 7.5
600.0A range: 3 or less

AC current

20/600A (10-1kHz, true effective value rectification),
Basic accuracy 45-66Hz: ±1.3%rdg. ±0.08A (at 20A)

Direct current

20/600A,
Basic accuracy: ±1.3%rdg. ±0.08A (20A range)

AC + direct current

20/600A (10-1kHz, true effective value rectification)
Basic accuracy DC, 45-66Hz: ±1.3%rdg. ±0.13A (at 20A)

Standard

CATIV 600V, CATIII 1000V
(When using P2000) CATIV 1000V, CATIII 2000V

Frequency

9.999/99.99/999.9Hz
Basic accuracy: ±0.1%rdg. ± ±0.003Hz (at9.999Hz)

Resistance

600/6k/60k/600kΩ
Basic accuracy: ±0.7%rdg. ±0.5Ω(at600Ω)

Capacitance

1μ/10μ/100μ/1000μF
Basic accuracy: ±1.9%rdg. ±0.005μF(at1μF)

Temperature

-40 to 400℃
Accuracy: ±0.5%rdg. ±3.0℃+ temperature probe accuracy addition

Electric inspection

Hi: AC40V~600V, Lo:AC80V~600V(50/60Hz)

hanonic

[When Z3210 is installed] Honic level up to 30th in voltage and current / content rate / total honic distortion rate
※Can be displayed in application software (GENNECT Cross)

Function

Conduction check, diode check, electric detection, DC power, AC/DC automatic discrimination function, positive and negative judgment function of DC current and voltage, maximum, minimum, average, wave height value maximum and minimum value display, low-pass filter function, display value hold, auto hold , backlight, auto power save, buzzer sound, zero adjustment

Clamp inner diameter

33 mm