ESCO EA742GB-62. Temperature data logger (with surface sensor)

<Set contents>

Temperature data logger (EA742GB-61) x 1 piece,
Sensor for stationary surface pasting (EA701BA-14) x 2

Specification

With 2 surface sensors

<Main body specifications>

Measuring range

-202 to 1372℃(main body)
※Depending on the sensor used

Decomposition

0.1℃(-202 to 999.9℃),
1℃ (other than the above)

Accuracy

±(0.3%rdg+1)℃: at23℃±5℃
※Measurement accuracy depends on the sensor connected.
※In the case of surface sensor connection, the above accuracy will be +2%rdg.

Function

Upper and lower limit alarm function, highest and lowest temperature display, relative value display

Power supply

4 AA batteries (included)

Size

158(W)×40(D)×106(H)mm

Weight

420 g

Accessories

SD card (8GB) x 1, dedicated analysis software CD x 1, carrying case for the main unit, instruction manual

Channel

4 channels

Temperature coefficient

± (0.01%rdg+0.1)℃/℃(other than 18 to 28℃)

Permissible signal source resistance

200Ω or less
※Depending on the length of the thermocouple, measurement errors may occur depending on the length of the thermocouple due to the line resistance of the wire diameter.
・If the thermocouple wire diameter is φ0.32, the length of the thermocouple should be 15m or less.

Sampling

About 1 second

Connection sensor

K thermocouple thermocouple connector ANSI standard (yellow)

Recording interval

1 second, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 30 seconds,
1 minute, 2 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes

Battery life

About 500 hours
※When room temperature, alkaline batteries are used, recording interval is 1 minute, backlight OFF, measurement display OFF

Material

ABS resin