SIBATA LD-6N2 Digital Dust Indicator

Model

LD-6N2

Measurement Principle

Light Scattering Method

Measurement Range

1~100,000 CPM (0.001~100mg/m3)

Measurement Accuracy

Against indicated value±10%±1 count(Satandard Varticle)

Light Source

Laser Diode

Measurement Sensitivity

1CPM=0.001mg/m3(for standard particles)

Output

USB connector:Measurement data serial port Output connector:Pulse output/External device control signal output/Data output for external signal unit

PC

Model in which above OS can operate

CD Drive

One CD drive is necessary (at Installation)

Communication Port

One USB A connector port is necessary. This function must work properlly in computer.

Function

/zero cancellation(Measurement for 6 seconds)/sensitivity correction(Measurement of scattered plate for 1 minute)/Manual measurement (manual operation)/Down timer measurement/Mass concentration conversion/Data logging(Memory recording of measured values)/Communication function

Data Logging

Measurement start time setting/Maximum measurement time setting

Recording cycle setting/Recordable 40,000

Display Content

Accumulated count:1~99,999(unit count)
Instantaneous value: 1 to 99,999 (unit: CPM)
Mass concentration conversion value (unit: mg / m3 only after measurement)
Battery level display

Power Supply

AC power supply, USB power supply, or internal nickel metal-hydride batteries
Battery charging time : About 4hours ; Battery operating time : About 10hours

Dimensions/Weight

Detection unit : 100(W)x37(D)x72(H)mm (Installing the air intake)
Main unit : 70(W)x35(D)x105(H)mm (ExcluDing protrusions)
Relay cable 1m
Approx. 0.5kg(Detection unit, Main uni, Relay cable)

Accessories

AC adapter (AC power / charging), 3 clips, standard scattering version and zero filter (with filter / protective cap), LD-6N / 6N2 software (CD-ROM), USB cable (A-miniB Type), software Case (for storing the operation unit)

Others

Those that have been completely confirmed to work under the above OS