ESCOEA469H-25.25A socket (mechanical fittings for 3 types of pipes)Specifications:Call25 ANut double-sided width (F)59 mmNut height (H)21 mmSize between the end and the endX: 70mm, A: 91mmMaterialMain
ESCO
EA469H-25.
25A socket (mechanical fittings for 3 types of pipes)
Specifications:
Call | 25 A | Nut double-sided width (F) | 59 mm |
Nut height (H) | 21 mm | Size between the end and the end | X: 70mm, A: 91mm |
Material | Main body and nut: malleable cast iron (hot-dip galvanized), lock ring and collar: steel, packing: NBR | Weight | 673 grams |
Maximum working pressure | Water, air, oil: 1.0MPa (10.2kgf/cm2), city gas and LPG: 0.3MPa (3.1kgf/cm2) | ||
The maximum working pressure of polyethylene pipes is 0.75MPa (7.6kgf/cm2). | |||
Oil is kerosene, heavy oil, lubricating oil, hydraulic oil, etc., and cannot be used for hydraulic oil with additives. | |||
Operating temperature range | -10℃ to 60℃ (0℃ to 40℃ in the case of water) | ||
If it is used above 60℃, please replace the packing for heat resistance. | |||
Applicable type | JIS G 3452: Carbon steel pipe for piping, JIS G 3442: Galvanized steel pipe for water piping, JWWA K 116: Rigid vinyl chloride lining steel pipe for water supply (VA, VB), JWWA K 132: Polyethylene mixed body for water supply Lining steel pipe (PA, PB), JIS K 6741: rigid polyvinyl chloride pipe (VP) ※Packing set must be replaced for calls 25 and 30 ※Cannot be used for calls 65 and 80, JIS K 6742: Rigid polyvinyl chloride for water supply Lu pipe (VP for water supply, HIVP) ※Packing set replacement is required for calls 25 and 30 ※Cannot be used for calls 65 and 80, JIS K 6762: Polyethylene double-layer pipe for water supply (1 type) ※Call 30, 40, 50 require in-core※Cannot be used for calls 65 and 80 | ||