ESCO EA829VX-4 Tap die set (MM/UNC/UNF)-Tamasak (M) Sdn Bhd 京都玉崎马来亚西亚公司

ESCO EA829VX-4 Tap die set (MM/UNC/UNF)

ESCOEA829VX-4Tap die set (MM/UNC/UNF)Specifications:PurposeFor thread correction work of female and male screwsSet contentsTaps x 27 pieces, dice x 27 piecesT-type tap handle x 1, tap handle x 1Dice h

model：

ESCO

EA829VX-4

Tap die set (MM/UNC/UNF)

Specifications:

Purpose	For thread correction work of female and male screws	Set contents	Taps x 27 pieces, dice x 27 pieces T-type tap handle x 1, tap handle x 1 Dice handle x 1, (-) screwdriver x 1 Pitch gauge set of 12 (millimeter) x 1 piece Pitch gauge 12-piece set (inch) x 1 piece
Tap and die size (meter-level)	M3×0.5・M4×0.7・M5×0.8 M6×1.0・M7×1.0・M8×1.25 M9×1.25・M10×1.5・M12×1.75	Tap and dice size (metric fine)	M10 x 1.0
Tap and die size (UNC)	4-40・6-32・8-32・10-24・10-32 12-24・1/4"-20・5/16"-18 3/8"-16・7/16"-14・1/2"-13	Tap and die size (UNF)	1/4"-28・5/16"-24・3/8"-24 7/16"-20・1/2"-20
Tap and die size (BSP)	1/8"-28	Die outer diameter (metric, fine, UNC, UNF, BSP)	25.4mm
Pitch gauge	Millimeter: 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.5, 1.75, 27 (inch), 28 (inch) Inches: 12, 13, 14, 16, 18, 20, 24, 27, 28, 32, 36, 40	Corresponding material to be cut	Soft iron with a hardness of HRC 20 degrees or less
Material	Alloy steel	Case size	370 x 255 x 33 (T) mm