OMRON ZJ-SDA11 ZJ-SD100 Fan Ionizer-Tamasak (M) Sdn Bhd 京都玉崎马来亚西亚公司

Brand: OMRON

Model: ZJ-SDA11 ZJ-SD100

Product Name: Fan Ionizer

Specifications:

Sensor Head

Model	ZJ-SD100
Applicable Amplifier	ZJ-SDA11
Sensing distance	5 to 100 mm
Measurement voltage	Standard mode: ±50 KV, Precision mode: ±5 KV max. *1
Display resolution	Standard mode: 10 V, Precision mode: 1 V *2
*Linearity 3**	±5% FS *4
Response time	20 ms
Ambient temperature range	Operating and storage: 0 to 50°C (with no condensation or icing)
Ambient humidity range	Operating and storage: 35% to 85% (with no condensation)
Dielectric strength	1,000 VAC, 50/60 Hz, 1 min *5
Vibration resistance	Sensor Head: 3-mm double amplitude at 10 to 55 Hz for 45 min each in the X, Y, and Z directions, Preamplifier: 1.5-mm double amplitude at 10 to 55 Hz for 2 h each in the X, Y, and Z directions
Degree of protection	IP20
Connecting method	Pre-wired Connector (standard length: 2 m)
Weight (packed state)	Approx. 150 g
Materials	Sensor Head: Stainless steel Preamplifier: PC
Accessories	Instruction sheet, Preamplifier Mounting Brackets (ZX-XBT1)

*1. The measurement may become saturated if the Sensor is too close to an object being measured, even if it is within
the measurement voltage range. Use the distance from the measurement surface (mm) times 1 KV as a guide.
*2. This is the minimum value obtainable when a ZJ-SDA11 Amplifier Unit is connected.
*3. When the ambient temperature is stable at 25°C.
*4. When the measurement distance is 10 mm and the measurement voltage is -5 to 5 KV.
*5. When a Preamplifier is used (excluding the Sensor Head).

Amplifier

Model	ZJ-SDA11
Measurement period	1 ms
Possible average count settings *1	1, 2, 4, 8, 16, 32, 64, 128, 256, 512, or 1,024
*Linear output 2**	Current output: 4 to 20 mA/FS, Max. load resistance: 300 Ω Voltage output: ±4 V (±5 V, 1 to 5 V *3), Output impedance: 100 Ω
Judgment outputs (3 outputs: OPE1, OPE2, and OPE3)	NPN open-collector output, 30 VDC, 20 mA max. Residual voltage: 1.2 V max.
Bank shift input, zero reset input, timing input, reset input	ON: Short-circuited with 0-V terminal or 1.5 V or less OFF: Open (leakage current: 0.1 mA max.)
Functions	Measurement value display, display reverse, scaling, peak and bottom hold, distance compensation, present value display, limit number of display digits, monitor focus, mask hold, sensing area compensation, output value display, zero reset, linear output compensation, distance trigger, warning output, setting value display, zero reset memory, peak hold, delay hold, bank switching, resolution display, various timers, bottom hold, delay time setting, enable display, initialization, sample hold, timing inputs, zero reset display, teaching, peak-to-peak, key lock, judgment output display, direct threshold value setting, hold, clamp value setting, ECO mode, hysteresis adjustment, average hold, precise measurement mode
Indications	Operation indicators (OPE1 (orange), OPE2 (green), OPE3 (yellow), 7-segment main digital display (red), 7-segment sub-digital display (yellow), power ON indicator (green), zero reset indicator (green), enable indicator (green)
Power supply voltage	24 VDC ±10%, Ripple (p-p): 10% max.
Current consumption	24-VDC power supply: 140 mA max.
Ambient temperature range	Operating and storage: 0 to 50°C (with no icing or condensation)
Ambient humidity range	Operating and storage: 35% to 85% (with no condensation)
Insulation resistance	20 MΩ (at 500 VDC)
Dielectric strength	1,000 VAC, 50/60 Hz, 1 min
Shock resistance	Destruction: 300 m/s² 3 times each in 6 directions (up/down, left/right, and forward/ backward)
Vibration resistance	Destruction: 0.7-mm double amplitude at 10 to 150 Hz for 80 min each in the X, Y, and Z directions
Connecting method	Pre-wired (standard length: 2 m)
Weight (packed state)	Approx. 350 g
Materials	Case: PBT (polybutylene terephthalate), Cover: Polycarbonate
Accessories	Instruction sheet