Model | ZN-A2502D | ZN-A4105D | ZN-A6112 | ZN-A6112P |
Air outlet dimension | 225 × 205 mm | 360 × 360 mm | 578 × 568 mm |
Main filter/ Removal rate | HEPA filter/ 99.99% of particles 0.3- μm and larger |
Air volume (m3/min) | 0.3 to 1.8 m3/min (typical) | 1.0 to 5.0 m3/min (typical) | 4 to 12 m3/min (typical) |
Power supply voltage | 24 VDC ± 10%, Ripple (p-p): 10% max. |
Current consumption | Airflow level 5: 2.1 A max. (RMS value) (Peak: 3 A) | Airflow level 5: 3.5 A max. (RMS value) (Peak: 5.5 A) | Airflow level 5: 24 VDC: 4.3 A max. (RMS value) (Peak: 8 A) |
Airflow levels | 5 levels Settable by button operation Settable by serial (RS-422 or RS-485 *1) communications | 5 levels Settable by button operation Settable by serial (RS-422 or RS-485 *1) communications Settable by ON/OFF signal input (3 levels) *2 |
Running noise | Airflow level 3: 53 dB (typical) | Airflow level 3: 53 dB (typical) |
Fan motor | Compact DC brushless centrifugal blower x 2 | DC brushless turbo fan x 1 | DC brushless turbo fan x 1 |
Indicators | Operating status: Green/Red Air volume: Blue |
Filter clogging detection | Yes | No | Yes |
External output | Alarm output 1: Alarm output 1 turns OFF when one of the following events occurs. (Normally alarm output 1 is ON.) (Check indicator to find out which event occurred.) Filter is clogged. Fan error Cleaning alarm for discharge needle (when ZN- J-series Ionizer (sold separately) is connected) Discharge error (when ZN-J-series Ionizer (sold separately) is connected) Alarm output 2: Enabled only when ZN-J-series Ionizer (sold separately) is connected. Alarm output 2 turns OFF to indicate that cleaning is necessary for ZN-J Series discharge needles. (Normally alarm output 2 is ON.) | Fan operation alarm output Alarm output OFF in below cases (ON during normal operation) Fan not rotating (Including when power is OFF or on standby) Trouble Clogged filter (ZN-A6112P only) |
30 VDC, 50 mA max. Residual voltage: 1 V max. with load current of 10 mA, 2 V max. with load current of 50 mA. |
Applicable Ionizer Unit (Optional) | ZN-J25A | ZN-J41A | None |
Ambient temperature range | Operating and storage: 0 to 40 °C (with no icing or condensation) |
Ambient humidity range | Operating and storage: 35% to 85% (with no condensation) |
Applicable contamination degree | Pollution degree 2 |
Material | Top: Antistatic plastic, bottom: SECC | Top: ABS resin, HEPA filter frame: aluminum |
Dimensions (mm) | 250 × 250 × 97.5 mm (W × D × H) | 410 × 410 × 129.5 mm (W × D × H) | 714.4 × 654.4 × 174.3 mm (W × D × H) (Height from attachment surface: 117.3) |
Weight (Packaged) | Approx. 2 kg (Approx. 3.3 kg) | Approx. 5.2 kg (Approx. 8.6 kg) | Approx. 12.5 kg (Approx. 17 kg) |
Accessories | Instruction Sheet, Sealing parts, Mounting screws, I/O connector (XW4B-06B1-H1) | Instruction Sheet, Sealing parts, Mounting screws, I/O connector (XW4B-10B1-H1) |