KYOWA CTRS-CAG010A CAN Unit Compact Recorder

CAN Port Connector

ECB.1B.303.CLN LEMO made
(Compatible plug FGB.1B.303.CLAD62Z)

CAN Protocol

ISO/DIS 11898-1 compliant
*Support for CAN and CAN FD Frames

Supported Physical Layer

ISO 11898-2 and ISO 11898-5
*Low Speed CAN not supported

Termination Resistor

Implementation (Selectable ON/OFF)

Communication Speed

1000, 800, 500, 250, 125, 100, 83.3, 62.5, 50, 33.3, 25, 20, 10 kbps

CAN FD Data Bit Rate

5, 4, 2, 1, 0.5 Mbps, OFF

*Limited by communication speed.
Refer to The Configurable CAN FD Data Bit Rate Table.

CAN Recording Mode

Selected CAN ID mode (max. 1024 messages)

All CAN ID mode
*CAN trigger is not available (with all CAN ID mode).

Listen Only Mode

(Selectable ON/OFF)
*CAN data output is not available with listen only mode.

CAN Data Output

Predetermined CAN data can be output up to 32 messages at one time.

CAN Data Output Timing

Output at start / Output at stop / Interval / Manual

CAN Trigger

Received CAN messages can be used as trigger source.

CAN Trigger Type

Manual / Analog / Digital / Composite

Other Function

Automatic communication speed check

Power Supply

Supplied by the CTRS-100A or CTRS-BATT010A

Power Consumption

Approx. 0.6 W (when supplying 12 VDC)

Operating Temperature

-10 to 50°C

Operating Humidity

20 to 90% (Non-condensing)

Storage Temperature

-20 to 60°C

Vibration Resistance

49.0 m/s² (5 G), 5 to 200 Hz

Shock Resistance

490 m/s² (50 G), 11 ms or less, half sine wave

Degree of Protection

IP50 (IEC 60529)

Dimensions

26.6 W × 92 H × 94 D mm
(Excluding protrusions or protectors)

Weight

Approx. 220 g

Compliance

Directive 2014/30/EU (EMC)
Directive 2011/65/EU, (EU) 2015/863 (10 restricted substances) (RoHS)

Utility Nuts

Size: M4, 6 places