Channels | 1 |
Applicable Transducers | Strain-gage transducers
(TEDS compatible sensors connectable ) |
Compatible Bridge Resistance | 87.5 Ω to 1 kΩ
(Up to four 350 Ω transducers connected in parallel.) |
TEDS Compatible | Interface:
Compatible with IEEE1451.4 Mixed Mode Transducer Interface Class 2.
Applicable sensors:
Should have the information according to IEEE template No. 33.
(Cable length: 30 m or less) |
Bridge Excitation | 10, 2 VDC, selectable |
Measuring Range | -3.2 to 3.2 mV/V
(Including zero adjustment range) |
Zero Adjustment Range | Within measurement range
(Not retained when power supply interrupted.) |
Nonlinearity | Within ±(0.02% FS + 1 digit) |
Stability | Zero point: Within ±0.25μVRTI per°C
Sensitivity: Within ±0.005%/°C |
Peak/Bottom Detection | Detecting scheme: Digital hold |
Frequency Response | DC to 1 kHz (+1 dB, -2 dB) |
Sampling Speed | 4000 times/s |
AD Resolution | 24 bits |
Analog Monitor | Voltage output: ±(5 V ±200 mV)
(load resistance 5 kΩ or more) |
Indicators | 3.5-inch TFT color LCD
Display area: 70.6 × 59.2 mm, 320 × 240, touchscreen |
Indication | Setting range: -99999 to 99999
(Decimal point to be put anywhere.)
Update speed
Numeric value display: 4 times/s
Waveform display: 2 times/s |
Calibration Function | Manual calibration:
Sensitivity registering calibration
Actual load calibration
Units
TEDS auto calibration
TEDS part calibration: TEDS calibration item
TEDS operation configuration:
TEDS reading operations
Zero during TEDS
TEDS information display
Numeric value registering calibration |
Smoothing Functions | Analog filter (LPF): 1, 30, 300 Hz, Flat (1 kHz or more)
Attenuation: -12 dB/oct.
Minimum scale: 1, 2, 5, 10, 20, 50, 100
Moving average: None, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048 times |
Zero Compensation Function | Zero tracking (Auto digital Zero within the setting range)
Judging time: 0.00 to 9.99 s
Compensation range: 0 to 99999
Zero near zero (Auto zero display)
Setting zero: 0 to 9 |
Additional Value | -99999 to 99999 count |
Original Values (Sensor Output Value) | -3.2000 to 3.2000 mV/V (5 digits)
Accuracy: Within ±0.1% FS |
Measurement Condition Numbers | 32 (16 for control input) of measurement condition file can be saved.
Capable of switching by the key operation, control input, and communication command. |
Comparator Setting | Points: 4
Types: Extra high (HH), high (HI), low (LO), extra low (LL)
If there are 2 hold values, they are assigned as follows.
Hold value 1: High 1 (HI1), low 1 (LO1)
Hold value 2: High 2 (HI2), low 2 (LO2)
Setting range: ±99999
Hysteresis width: 0 to 9999
Using comparator can be set.
Output logic: Positive/negative
Comparison speed: 4000 times/s (Normal comparative mode) |
Judgment Function | Point : 1
Type : OK |
Waveform Comparison Setting | Points: 2
Type: Wave HI, Wave LO
Set reference waveform, waveform comparison HI, waveform comparison LO, move waveform, comparison area, register waveform
Waveform comparison logic: Positive/negative |
Waveform Judgment Function | Type : 1
Point : OK |
Motion Detect | Motion detect function: Enable/disable
Motion detect width: 0 to 99999
Motion detect time: 0.01 to 9.99
Motion detect logic: Positive/negative |
Measuring Mode Setting | Operation modes:
Normal
Peak hold
Block-specified peak hold
Time-specified peak hold
Bottom hold
Block-specified bottom hold
Time-specified bottom hold
Arbitrary point hold
Block peak-bottom hold
Time peak-bottom hold
Block average hold
Time average hold
Bock inflection hold
Time inflection hold
Block maximal/minimal hold
Time maximal/minimal hold
Block peak/average hold
Time peak/average hold
Block bottom/average hold
Time bottom/average hold
Block peak/arbitrary hold
Time peak/arbitrary hold
Block bottom/arbitrary hold
Time bottom/arbitrary hold
Previous value comparison peak hold
Block previous value comparison peak hold
Time previous value comparison peak hold
Previous value comparison bottom hold
Block previous value comparison bottom hold
Time previous value comparison bottom hold
Detect time: 0.01 to 9.99 s
Delay time: 0.00 to 9.99 s
The following settings can be changed according to the operation mode.
Detection trigger level
Detection trigger way
Inflection point discrimination time
Inflection point discrimination value
Extreme value discrimination setting
Initial value for compare with measuring value
Comparison mode:
Normal comparison
Hold comparison
Display mode:
Normal display
Hold display |
Waveform Display | X-axis setting
End point: 0.5, 1.0, 2.0, 5.0, 10.0, 20.0, 50.0, 100.0 s.
Y-axis setting
Start point: -99999 to 99999
End point: 250, 500, 1000, 2000, 5000, 10000, 20000, 50000, 100000, 200000
Start mode of waveform, passed level, passed level way, holding time of waveform.
The WGA displays the waveform of the input variation regardless to the Operation Modes setting. |
System | Key lock
Setting value initialize
Backlight illumination time
Language
Clock
Comparison display color
Display stability |
Self-check | Memory
Channel |
Operation Check | Display
Touchscreen
Control Input/output
Communication
BCD output
DA output
SD card |
Control Input | Points: 9
Types: Zero command, hold command, reset command, waveform command, TEDS command, measurement condition select 0 to 3
Signal formats: Open collector (NPN) or non-voltage contact signal
(Capacity: 12 VDC, 5 mA or more) |
Control Output | Points: 16
Types: HH, HI, OK, LO, LL, healthy, abnormal channel, abnormal memory, SD, communication error
Output type: Open collector (NPN)
Load capacity: 30 VDC, 20 mA (Load resistance) |
Communication | Signal system: RS-232C, full duplex system
Transmission system: Asynchronous
Bit configuration
Data bits: 7
Stop bit: 1
Parity bit: Odd number
Flow control: None
Baud rate: 2400, 4800, 9600, 19200 bps
Transmission mode: Repeat output, output at hold, Tx and Rx
NOTE: When equipping the optional CC-Link (RS-485), the RS-232C of the standard equipment is disabled. Otherwise, RS-232C is enabled. |
SD Card | Saving setting value:
Saves the all setting values (excluding the calibration value) to the SD card.
Reading setting value:
Reads the all setting values (excluding the calibration value) from the SD card and rewrites those of the WGA to the read one.
Recording measuring value:
Pushing recording key, the WGA records the waveform data to the SD card.
View waveform file name:
Browsing the waveform data, deleting the wave data, and deleting the directory are available.
Format:
Erase all data that are saved in the SD card is available.
(Quick format is available.)
Update:
Capable of updating the program version that is saved in the SD card.
SD card type:
SD, SDHC (up to 32 GB) |
Power Supply | 100 to 240 V, power consumption: 20 VA or less |
Dimensions | 100 W ×96 H ×135 D mm (Excluding protrutions) |
Weight | Approx. 950 g (Excluding options) |
Operating Temperature | -10 to 40 °C |
Operating Humidity | 20 to 85% or less (Non-condensing) |
Compliance | Directive 2014/30/EU (EMC)
Directive 2014/35/EU (LVD) (Installation category Ⅱ, Pollution degree 2)
Directive 2011/65/EU, (EU)2015/863
(10 restricted substances) (RoHS) |
