KYOWA PCD-400B Sensor Interface

Channels

4

Input Form

Balanced differential input

Synchronous Measurement

Up to 4 units by 16 channels

Compatible Gage Resistance

Quarter bridge 2-wire system, 3-wire system: 120 Ω
Half bridge system, full bridge system: 120 to 1000 Ω

Input Connector

D-sub 37-pin connector

Bridge Excitation

AC 2 V_rms

Gage Factor

2.00 fixed

Balance Adjustment

Resistance: Within ±2% (±10 k ×10^-6 strain)
Capacitance: Within 5000 pF

Balance Adjustment Methods

Resistance: Auto balance
Capacitance: CST method (Capacitance self-tracking)

Nonlinearity

Within ±0.1% FS

Range

200, 500, 1 k, 2 k, 5 k, 10 k, and 20 k ×10^-6 strain – 7 steps
Accuracy: within ±0.5% FS

Frequency Response

DC to 200 Hz, deviation: Within ±10%

Sampling Frequencies

Max. 10 kHz (Synchronous 4-unit sampling for 16 channels at 10 kHz)

LPF

Transfer characteristic: 2nd order Butterworth
Cutoff frequencies: 10, 30, 100 Hz, and FLAT (4 steps)
Amplitude ratio at cutoff point: -3 ±1 dB
Attenuation: (-12 ±1) dB/oct.

AD Converter

24 bits

Holding Setting Condition

The range and balance adjustment value etc. are written to nonvolatile memory.

TEDS

Reads information from TEDS-installed sensors.
(Input adapters: UI-10A and UI-11A only)
Channel name writing
(If the manufacturer’s ID is Kyowa)

Interfaces

USB2.0 (Conforms to High-speed USB standards.USB3.0 supported)

Stability

Temperature
Zero point: Within ±0.2 ×10^-6 strain per ºC
Sensitivity: Within ±0.05%/ºC

Time
Zero point: Within ±0.5 ×10^-6 strain per 8h
Sensitivity: Within ±0.15%/8h

Withstand Voltage

250 VAC for 1 minute between input and case
250 VAC for 1 minute between input channels

Operating Temperature

0 to 40ºC

Operating Humidity

20 to 85% (Non-condensing)

Vibration Resistance

±29.42 m/s² (3 G)
5 to 200 Hz (12 cycles for each axis, 10 minutes/cycle)
*unstacked

Power Supply

11 to 16 VDC
Connector type: RM12BRD-4PH (Hirose)

Current Consumption

0.7 A or less (12 VDC)
0.6 A or less (15 VDC)

Dimensions

210 W x 35 H x 157.5 D mm (Excluding protrusions)

Weight

Approx. 650 g

Compliance

Directive 2011/65/EU, (EU)2015/863 (10 restricted substances) (RoHS)

Directive 2014/30/EU (EMC)

Degree of Protection

IP30 (JIS C 0920 / IEC 60529)
*Except when the one-touch type input adapter UI-55A is connected and when the adapter is not connected.

*The specifications apply to the state in which the temperature has stabilized after a preheating time of 1 hour.