Measuring Targets | Strain gages (Full bridge system) Strain-gage transducers Voltage |
Channels | 4 |
Input Resistance | Approx. 10 MΩ + 10 MΩ (Strain mode) Approx. 1 MΩ (Voltage mode) |
Input Format | Balanced differential input (Strain mode) Unbalanced input (Voltage mode) |
IMRR | 120 dB (When 500 ×10-6 strain range) |
Gage Factor | 2.00 fixed (Strain mode) |
Frequency Response | [With DC coupling] DC to 5 kHz, deviation within +1 dB, -3 dB
[DC cut (With AC coupling)] 0.2 Hz (See the HPF) |
Bridge Excitation | Within 2 VDC ±2% (Strain mode) |
Range Accuracy | Within ±0.3% FS |
Compatible Bridge Resistance | 120 to 1000 Ω (Strain mode) |
Measuring Range | 500, 1 k, 2 k, 5 k, 10 k, 20 k ×10-6 strain, and OFF (Strain mode)
1, 2, 5, 10, 20, 50 V, and OFF (Voltage mode) |
Balance Adjustment Range | Within ±2.4% (±12000 ×10-6 strain) (At strain measurement)
Within ±5 V (At voltage measurement) |
ZERO Accuracy | Within ±0.3% FS (Voltage OFF mode) |
Nonlinearity | Within ±0.1% FS |
Calibration Values (CAL) | Output at ±100% and ±50% of each range Accuracy: Within ±0.3%FS |
Monitor Output | Accuracy: Within ±5 V ±0.5% (±5 V to full scale of each range) |
LPF | Transfer characteristic : 2nd order Butterworth Cutoff frequencies : 10, 30, 100, 300, 1 kHz and FLAT (6 steps) Amplitude ratio at cutoff point : -3 ±1 dB Attenuation : (-12 ±1) dB/oct. |
HPF | Cutoff frequencies : 0.2Hz Attenuation : Within (-6 ±1) dB/oct. |
AD Converter | 16 bits |
TEDS | Reads information from TEDS-installed sensors. |
Isolation | Between input and case (Output) : Withstand voltage 500 VDC, 1 min. Between channels : Withstand voltage 500 VDC, 1 min. |
|