KEYENCE LJ-V7001P Controller, PNP Type-Tamasak (M) Sdn Bhd 京都玉崎马来亚西亚公司

KEYENCE

LJ-V7001P

Controller, PNP Type

Specifications:

Model		LJ-V7001P
Number of connectable sensors		Max. 2 units
Display	Minimum displayable unit	0.1 µm, 0.00001 mm², 0.01°
Display	Maximum display range	±9999,99mm, ±9999,99mm²
Input terminal block	Laser remote interlock input	Non-voltage input^*1
Input terminal block	Encoder input	NPN open-collector output, voltage output (5 V/12 V/24 V), and line-driver output all supported
Input terminal block	Trigger input	Voltage input^*2
	Timing 1,2 input
	Auto-zero 1,2 input
Input terminal block	Reset 1, 2 input
Input terminal block	Start measurement/stop input
	Start storage/stop input
	Clear memory input
	Laser OFF input
	Programme switch input	Voltage input x 4 inputs^*2
Output terminal block	Analogue voltage output	±10 V x 2 outputs, Output impedance: 100 Ω
Output terminal block	OUT comparator output	PNP open collector output x 12 outputs^*3 (Can freely assign 16 OUTs x 3 stage judgement results)
	Strobe output	PNP open collector output^*3
	Disable trigger output
	Memory FULL output
	Ready output
Output terminal block	Error output	PNP open collector output (N.C.)^*3
PC interface	Ethernet	1000BASE-T/100BASE-TX^*4
	USB	USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)^*4
	RS232C	Measurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s)
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
Rating	Current consumption	1.3 A or less when connected to 1 head 1.9 A or less when connected to 2 heads
Environmental resistance	Ambient temperature	0 to +50 °C
Environmental resistance	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 1,500 g
^1 The rating for non-voltage input is up to 1 V for ON voltage and up to 0.6 mA for OFF current ^2 The rating for voltage input is a maximum input voltage of 26.4 V, a minimum ON voltage of 10.8 V, and up to 0.6 mA for OFF current ^3 The rating for PNP open-collector output is up to 50 mA (30 V or less), residual voltage of up to 1 V ^4 Sample DLL and LabVIEW programs are available. Contact your local sales office for details.