OMRON S8AS Smart Power Supply
Brand: OMRONModel: S8ASProduct Name: Smart Power SupplySpecification:S8AS-24006 ModelS8AS-24006S8AS-24006NS8AS-24006REfficiency (Typ.)80% min.Input condi- tionsVoltage range *1100 to 240 VAC (85 to 26
- model: S8AS
Brand: OMRONModel: S8ASProduct Name: Smart Power SupplySpecification:S8AS-24006 ModelS8AS-24006S8AS-24006NS8AS-24006REfficiency (Typ.)80% min.Input condi- tionsVoltage range *1100 to 240 VAC (85 to 26
Brand: OMRON
Model: S8AS
Product Name: Smart Power Supply
Specification:
S8AS-24006
Model | S8AS-24006 | S8AS-24006N | S8AS-24006R | ||
Efficiency (Typ.) | 80% min. | ||||
Input | Voltage range *1 | 100 to 240 VAC (85 to 264 VAC) | |||
Frequency *1 | 50/60 Hz (47 to 63 Hz) | ||||
Current | 100-V input | 3.8 A max. | |||
200-V input | 2.0 A max. | ||||
Power factor *4 | 0.95 min. | ||||
Harmonic current | EN61000-3-2 | ||||
Leakage | 100-V input | 0.5 mA max. | |||
200-V input | 1.0 mA max. | ||||
Inrush | 100-V input | 25 A max. (for a cold start at 25°C) | |||
200-V input | 50 A max. (for a cold start at 25°C) | ||||
Output | Number of branches | 6 | |||
Maximum cutoff output | 3.8 A | ||||
Total output current | 10 A | ||||
Allowable voltage range *3 | ±10% (with V.ADJ) | ||||
Ripple noise voltage | 2.0% [P-P] max. (for rated input and output voltage) *4 | ||||
Output leakage current | 10 mA max. | ||||
Input fluctuation | 0.5% max. (Input: 85 to 264 VAC, 100% load) *5 | ||||
Load fluctuation | 4.0% max. (rated input, 0% to 100% load) *5 | ||||
Temperature fluctuation | 0.05%/°C max. | ||||
Startup time *2 | 3,000 ms max. (for rated input and output voltage) *4 | ||||
Output hold time *2 | 20 ms max. (for rated input and output voltage) *4 | ||||
Func- | Tripping | Abnormal | 28.8 V (Cannot be changed.) | ||
Abnormal | Setting range: 0.5 to 3.8 | 3.8 A (Cannot be | Setting range: 0.5 to 3.8 | ||
Abnormal | Branch outputs are cut off when the total output current is more than 17 A | ||||
Tripping | Photoswitch output | ||||
Undervoltage | Undervoltage | Setting range: 18.0 to | 20.0 V (Cannot be | Setting range: 18.0 to | |
Undervoltage | Photoswitch output | ||||
Maintenance | Maintenance | Setting range: 0.0 to 5.0 | 0.5 yr (Cannot be | Setting range: 0.0 to 5.0 | |
Maintenance | Photoswitch output | ||||
Over- | Over- | Setting range: 25 to | 90°C (Cannot be | Setting range: 25 to | |
Over- | Photoswitch output | ||||
Display | Output | Display range:17.0 to 30.0 V | |||
Output | Branch output display range: 0.0 to 4.0 A | ||||
Maintenance | Display range: FUL (Full)/HLF (Half)/0.0 to 5.0 yr | ||||
Temperature | Display range: -20 to 100°C | ||||
External Tripping Input | The input can be | All branch outputs: | The input can be | ||
Startup sequence | Setting range: 0.0 to | Branch output 1: 0.0 s | Setting range: 0.0 to | ||
Shutdown sequence | Setting range: 0.0 to | All branch outputs: 0.0 s | Setting range: 0.0 to | ||
Communications | Not supported | Supported (RS-485) | |||
Sampling period | 1 ms | ||||
Parallel connection | Not supported | ||||
Series connection | Not supported | ||||
Others | Ambient operating | Refer to the derating curve (no icing or condensation). *2 | |||
Storage temperature | -25 to 65°C | ||||
Ambient operating humidity | 25% to 85% (storage: 25% to 90%) | ||||
Withstand voltage | 3.0 kVAC for 1 min between all input terminals collectively and all branch | ||||
Insulation resistance | 100 MΩ min. at 500 VDC between the protective earth terminal or all input | ||||
Vibration resistance | No abnormality after 10 to 55 Hz at 0.375-mm single amplitude for 2 h each | ||||
Shock resistance | No abnormality after 150 m/s2 3 times each in 6 directions. | ||||
Output indicator | Provided (Color: green) | ||||
Conducted EMI | Conforms to EN 61204-3 Class A and FCC Class A. | ||||
Radiated EMI | Conforms to EN 61204-3 Class A. | ||||
Safety standards | cULus: UL508 (Listing. Class2: Per UL1310), CSA C22.2 No.107.1 (Class2: | ||||
SEMI standard | SEMI F47-0706 (200 VAC input) | ||||
Weight | 1,600 g max. |
*1. Do not use an inverter output for the Power Supply. Inverters with an output frequency of 50/60 Hz are available, but
the rise in the internal temperature of the Power Supply may result in ignition or burning.
*2. Refer to Engineering Data on Data Sheet for details.
*3. If the output voltage adjuster (V. ADJ) is turned, the voltage will increase by more than 10% of the voltage adjustment
range. When adjusting the output voltage, confirm the actual output voltage from the Power Supply and be sure that
the load is not damaged. If the output voltage exceeds 28.8 V, all branch outputs will be cut off.
*4. Rated input and output conditions: Rated input voltage, rated frequency, rated output voltage, rated total output
current, and maximum cutoff output current.
*5. 100% load conditions: Rated output voltage, rated total output current, and maximum cutoff output current.
S8AS-48008
Model | S8AS-48008 | S8AS-48008N | S8AS-48008R | ||
Efficiency (Typ.) | 80% min. | ||||
Input | Voltage range *1 | 100 to 240 VAC (85 to 264 VAC) | |||
Frequency *1 | 50/60 Hz (47 to 63 Hz) | ||||
Current | 100-V input | 7.4 A max. | |||
200-V input | 3.9 A max. | ||||
Power factor *4 | 0.95 min. | ||||
Harmonic current | EN61000-3-2 | ||||
Leakage | 100-V input | 0.5 mA max. | |||
200-V input | 1.0 mA max. | ||||
Inrush | 100-V input | 25 A max. (for a cold start at 25°C) | |||
200-V input | 50 A max. (for a cold start at 25°C) | ||||
Output | Number of branches | 8 | |||
Maximum cutoff output | 3.8 A | ||||
Total output current | 20 A | ||||
Allowable voltage range *3 | ±10% (with V.ADJ) | ||||
Ripple noise voltage | 2.0%[P-P] max. (for rated input and output voltage) *4 | ||||
Output leakage current | 10 mA max. | ||||
Input fluctuation | 0.5% max. (Input: 85 to 264 VAC, 100% load) *5 | ||||
Load fluctuation | 4.0% max. (rated input, 0% to 100% load) *5 | ||||
Temperature fluctuation | 0.05%/°C max. | ||||
Startup time *2 | 3,000 ms max. (for rated input and output voltage) *4 | ||||
Output hold time *2 | 20 ms min. (for rated input and output voltage) *4 | ||||
Func- | Tripping | Abnormal | 28.8 V (Cannot be changed.) | ||
Abnormal | Setting range: 0.5 to 3.8 | 3.8 A (Cannot be | Setting range: 0.5 to 3.8 | ||
Abnormal | Branch outputs are cut off when the total output current is more than 27 A | ||||
Tripping alarm | Photoswitch output | ||||
Undervoltage | Undervoltage | Setting range: 18.0 to | 20.0 V (Cannot be | Setting range: 18.0 to | |
Undervoltage | Photoswitch output | ||||
Maintenance | Maintenance | Setting range: 0.0 to 5.0 | 0.5 yr (Cannot be | Setting range: 0.0 to 5.0 | |
Maintenance | Photoswitch output | ||||
Over- | Over- | Setting range: 25 to | 90°C (Cannot be | Setting range: 25 to | |
Over- | Photoswitch output | ||||
Display | Output | Display range:17.0 to 30.0 V | |||
Output | Branch output display range: 0.0 to 4.0 A | ||||
Maintenance | Display range: FUL (Full)/HLF (Half)/0.0 to 5.0 yr | ||||
Temperature | Display range: -20 to 100°C | ||||
External Tripping Input | The input can be | All branch outputs: | The input can be | ||
Startup sequence | Setting range: 0.0 to | Branch output 1: 0.0 s | Setting range: 0.0 to | ||
Shutdown sequence | Setting range: 0.0 to | All branch outputs: 0.0 s | Setting range: 0.0 to | ||
Communications | Not supported | Supported (RS-485) | |||
Sampling period | 1 ms | ||||
Parallel connection | Not supported | ||||
Series connection | Not supported | ||||
Others | Ambient operating | Refer to the derating curve (no icing or condensation). *2 | |||
Storage temperature | -25 to 65°C | ||||
Ambient operating humidity | 25% to 85% (storage: 25% to 90%) | ||||
Withstand voltage | 3.0 kVAC for 1 min between all input terminals collectively and all branch | ||||
Insulation resistance | 100 MΩ min. at 500 VDC between the protective earth terminal or all input | ||||
Vibration resistance | No abnormality after 10 to 55 Hz at 0.375-mm single amplitude for 2 h each | ||||
Shock resistance | No abnormality after 150 m/s2 3 times each in 6 directions. | ||||
Output indicator | Provided (Color: green) | ||||
Conducted EMI | Conforms to EN 61204-3 Class A and FCC Class A. | ||||
Radiated EMI | Conforms to EN 61204-3 Class A. | ||||
Safety standards (pending) | cULus: UL508 (Listing. Class2: Per UL1310), CSA C22.2 No.107.1 (Class2: | ||||
SEMI standard | SEMI F47-0706 (200 VAC input) | ||||
Weight | 2,400 g max. |