Power ratings | 60 W | 120 W | 240 W | 480 W |
Output voltage (VDC) | 24 V | 24 V | 24 V | 24 V |
Efficiency (Typical) | 230 VAC input | 0.88 | 0.88 | 0.87 | 0.91 |
Input | Voltage *1 | 100 to 240 VAC, 90 to 350 VDC (allowable range: 85 to 264 VAC) *6 |
Frequency *1 | 50/60 Hz (47 to 450 Hz) | 50/60 Hz (47 to 63 Hz) |
Current (Typical) | 115 VAC input | 1.0 A | 2.2 A | 2.5 A | 4.8 A |
230 VAC input | 0.7 A | 1.4 A | 1.3 A | 2.4 A |
Power factor (Typical) *7 | 230 VAC input | 0.44 | 0.45 | 0.92 | 0.97 |
Harmonic current emissions | --- | Conforms to EN61000-3-2 |
Leakage current (Typical) | 115 VAC input | 0.19 mA | 0.19 mA | 0.24 mA | 0.26 mA |
230 VAC input | 0.34 mA | 0.36 mA | 0.54 mA | 0.65 mA |
Inrush current (Typical) *2 | 115 VAC input | 16 A |
230 VAC input | 32 A |
Output | Voltage adjustment range *3 | -10% to 15% (with V.ADJ) (guaranteed) |
Ripple at 20 MHz (Typical) *4 | 230 VAC input | 70 mV | 120 mV | 150 mV | 130 mV |
Input variation influence | 0.5% max. (at 85 to 264 VAC input, 100% load) |
Load variation Influence (Rated Input voltage) | 1.5% max., at 0% to 100% load |
Temperature variation influence | 0.05%/°C max. |
Start up time (Typical) *2 | 115 VAC input | 530 ms | 800 ms | 790 ms | 770 ms |
230 VAC input | 410 ms | 760 ms | 750 ms | 670 ms |
Hold time (Typical) *2 | 115 VAC input | 24 ms | 27 ms | 34 ms | 21 ms |
230 VAC input | 117 ms | 128 ms | 36 ms | 22 ms |
Additional functions | Overload protection *2 | 105% to 160% of rated load current |
Overvoltage protection *2 | Yes *5 |
Parallel operation | No |
Series operation | Possible for up to two Power Supplies (with external diode) |
Others | Ambient operating temperature | -25 to 60°C (Refer to Engineering Data) |
Storage temperature | -25 to 65°C |
Ambient operating humidity | 20% to 90% (Storage humidity: 10% to 95%) |
Dielectric strength (detection current: 20 mA) | 3.0 kVAC for 1 min. (between all inputs and outputs) 2.0 kVAC for 1 min. (between all inputs and PE terminal) 1.0 kVAC for 1 min. (between all outputs and PE terminal) |
Insulation resistance | 100 MΩ min. (between all outputs and all inputs/PE terminals) at 500 VDC |
Vibration resistance | 10 to 55 Hz, 0.375-mm single amplitude for 2 h each in X, Y, and Z directions |
10 to 150 Hz, 0.35-mm single amplitude (5 G max for 60W, 120W, 240 W, 3 G max for 480 W) for 80 min. each in X, Y, and Z directions |
Shock resistance | 150 m/s2, 3 times each in ±X, ±Y, and ±Z directions |
Output indicatior | Yes (color: green), lighting from 80% to 90% or more of rated voltage |
EMI | Conducted Emission | Conforms to EN61204-3 EN55011 Class A and based on FCC Class A |
Radiated Emission | Conforms to EN61204-3 EN55011 Class A |
EMS | Conforms to EN61204-3 high severity levels |
Safety standards | UL Listed: UL508 (Listing) UL UR: UL No. 62368-1 (Recognition) cUL: CSA C22.2 No.107.1 cUR: CSA C22.2 No.62368-1 EN: EN 62477-1, EN 62368-1 BIS: IS 13252 (Part1) |
Fulfilled Standards | SELV (EN 62368-1/EN 62477-1/UL No. 62368-1) |
Degree of protection | IP20 by EN/IEC60529 |
SEMI | F47-0706 (200 to 240 VAC) |
Weight | 260 g | 580 g | 940 g | 1,550 g |