KEYENCEGS-11N5Non-contact type Standard type NPN Standard cable 5 mSpecifications:ModelGS-11N5TypeStandard typeOutput typeNPNOperating distanceFrontSao(OFF→ON)10 mmSar(ON→OFF)18 mmSideSao(OFF→ON)6 mmS
KEYENCE
GS-11N5
Non-contact type Standard type NPN Standard cable 5 m
Specifications:
Model | GS-11N5 | ||
Type | Standard type | ||
Output type | NPN | ||
Operating distance | Front | Sao(OFF→ON) | 10 mm |
Sar(ON→OFF) | 18 mm | ||
Side | Sao(OFF→ON) | 6 mm | |
Sar(ON→OFF) | 14 mm | ||
Response time | Detection | Detect →Not detect | 20 ms + 2 ms × (number of units cascaded -1) *1 |
Not detect →Detect | 30 ms + 25 ms × (number of units cascaded -1) *1 | ||
Door operation | Acceptable operation frequency | 3 Hz | |
Cascading | Standard | Max. 30 units | |
Using Y-shaped connector | — | ||
Control output (OSSD output) | Output | Transistor outputs × 2 | |
Max. load current | Max. 100 mA | ||
Residual voltage (during ON) | Max 2.5 V (with a cable length of 5 m) | ||
OFF state voltage | Max 2.0 V (with a cable length of 5 m) | ||
Leakage current | Max. 500 µA | ||
Max. capacitive load | 2.2 µF | ||
Load wiring resistance | Max. 2.5Ω | ||
AUX (Non-safety related output) | Output | Transistor output | |
Number of outputs | 1 | ||
Max. load current | 50 mA | ||
Residual voltage (during ON) | Max 2.5 V (with a cable length of 5 m) | ||
External input (Short-circuit current) | Safety input | Approx. 1.5 mA × 2 | |
Reset/EDM input | — | ||
Applicable Standards (Safety) | EN 61508, IEC 61508 (SIL3) | ||
Protection circuit | Reverse current protection, short-circuit protection and surge protection for each output | ||
Power supply | Power voltage | 24 V DC ±20 % (Ripple P-P 10 % or less, Class2) | |
Current consumption | 0.8 W | ||
Environmental resistance | Enclosure rating | IP65/67(IEC60529), IP69K(ISO20653) (TÜV SÜD certified) Enclosure Type 3/4X/12/13 (NEMA250) | |
Operating ambient temperature | -20°C to +55°C (No freezing) | ||
Storage temperature | -25°C to +70°C (No freezing) *2 | ||
Operating relative humidity | 5% to 95% RH | ||
Storage relative humidity | |||
Vibration resistance | 10 to 55 Hz, Double amplitude 3.0 mm, 5 minutes in each of the X, Y and Z directions (IEC 60947-5-3) | ||
Shock resistance | 30 G in X, Y, Z directions 6 times each axis (IEC 60947-5-3) | ||
Material | Sensor main unit | Case | Zinc die cast (Nickel chrome plating), PBT, PAR |
Cable | PVC | ||
Actuator | Case | SUS430, SUS304, PBT | |
Weight | Approx. 270 g | ||
*1 Risk time according to IEC60947-5-3 is 150 ms + 2 ms × (number of units cascaded -1). | |||