KEYENCE KV-C32XTD 32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection

Type

I/O unit

External connection mode

Connector (MIL standard)^*1

Input

Number of inputs

32 points

Input mode

24 VDC mode^*2

Max. input voltage

26.4 VDC

Rated input voltage

24 VDC 4.1 mA

Min. ON voltage

19 V

Max. OFF current

1.5 mA

Max. OFF voltage

-

Common point mode

32 points/1 common point (2 terminals)^*3

Input time constant

25 µs/300 µs^*4/1 ms/10 ms

Input impedance

5.6 kΩ

Output

Number of outputs

32 points

Output form

MOS-FET (N ch) (with an overcurrent-proof function)

Rated load

30 VDC 0.2 A

Leak current at OFF

100 µA or less

Residual voltage at ON

0.5 V or less

Common point mode

32 points/1 common point (2 terminals)^*3

Operating time

OFF to ON: 150 µs or less, ON to OFF: 300 µs or less

Internal current consumption

65 mA or less

Weight

Approx. 130 g

^*1 Connectors for connector-type I/O units are not included. MIL40-pin slender connector kit OP-51404 and MIL40-pin connector kit OP-22184 are available separately.
^*2 All terminals are compatible with 2-wire system (however, EV Series 2-wire system proximity sensors are not supported).
^*3 Although there are two input COMs and two output COMs, these COM pairs are the same internally. The input and output COM pairs are independent.
^*4 Setup is only possible when KV-7500/7300/5500/5000/3000 is connected. When KV-1000/700 is connected, selection is not possible.