KEYENCE KL-16BX 16-point Screw Terminal Block

General specifications

Disconnection error output load

30 VDC, 0.1 A or less, residual voltage: 1 V or less

Vibration resistance

10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail

Insulation system

Photocoupler isolation

Power voltage

10.8 to 26.4 VDC (for the connector type I/O unit, this is supplied by the dedicated cable)

Operating ambient temperature

0 to 60°C

Operating ambient humidity

35 to 85%RH (no condensation)

Operating environment

No corrosive gas present

Noise immunity

Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (by way of a noise simulator)

Withstand voltage

500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal)

Insulation resistance

20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the input terminals; excluding the ERR output terminal)

Performance specifications

Input maximum rating

DC26.4V

Input voltage

24 VDC, 5.3 mA (24 V mode); 5 VDC, 0.9 mA (5 V mode)

Minimum ON voltage

19 V (24 V mode), 2.5 V (5 V mode)

Maximum OFF current

2 mA (24 V mode)

Maximum OFF voltage

0.8 V (5 V mode)

Input impedance

4.3 kΩ

Number of inputs/outputs

16, terminal block DC input

Internal current consumption

75mA or less

Weight

approx 140g

Output specifications

Output

-

Residual voltage (when output is ON)

Leakage current (when output is OFF)

transistor output

Rated load voltage

Rated output current

Common ground

ON delay time

OFF delay time

Insulation resistance

Insulation system

relay output

Rated voltage

Rated output current

Common ground

ON resistance

ON delay time

OFF delay time

Insulation resistance

Insulation system