KEYENCEKL-8BXT8 Input + 8 Transistor (Sink) Output Screw Terminal BlockSpecifications:ModelKL-8BXTGeneral specificationsDisconnection error output load30 VDC, 0.1 A or less, residual voltage: 1 V or l
KEYENCE
KL-8BXT
8 Input + 8 Transistor (Sink) Output Screw Terminal Block
Specifications:
Model | KL-8BXT | ||
General specifications | Disconnection error output load | 30 VDC, 0.1 A or less, residual voltage: 1 V or less | |
Vibration resistance | 10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail | ||
Insulation system | - | ||
Power voltage | 10.8 to 26.4 VDC (for the connector type I/O unit, this is supplied by the dedicated cable) | ||
Operating ambient temperature | 0 to 60°C | ||
Operating ambient humidity | 35 to 85%RH (no condensation) | ||
Operating environment | No corrosive gas present | ||
Noise immunity | Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (by way of a noise simulator) | ||
Withstand voltage | 500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal) | ||
Insulation resistance | - | ||
Performance specifications | Input maximum rating | ||
Input voltage | |||
Minimum ON voltage | |||
Maximum OFF current | |||
Maximum OFF voltage | |||
Input impedance | |||
Number of inputs/outputs | 8 DC inputs + 8-terminal terminal block transistor output | ||
Internal current consumption | 130mA or less | ||
Weight | Approx. 170 g | ||
Output specifications | Output | NPN open collector | |
Residual voltage (when output is ON) | 0.8V or less | ||
Leakage current (when output is OFF) | 100 µA or less | ||
transistor output | Rated load voltage | 30 V DC and | |
Rated output current | 0.5 A/output (when 24 V or more is applied across VC and C), 0.15 A/output (when 12 V or more is applied across VC and C), 0.05 A/output (when 5 V or more is applied across VC and C) | ||
Common ground | Written on the terminal wiring diagram of each unit | ||
ON delay time | 25 µs or less | ||
OFF delay time | 200 µs or less | ||
Insulation resistance | 20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminals; excluding the ERR output terminal) | ||
Insulation system | Photocoupler isolation | ||
relay output | Rated voltage | - | |
Rated output current | |||
Common ground | |||
ON resistance | |||
ON delay time | |||
OFF delay time | |||
Insulation resistance | |||
Insulation system | |||