KEYENCE KV-RC16BR 16-point Screw Terminal Block, Relay Output, with Repeater Function-Tamasak (M) Sdn Bhd 京都玉崎马来亚西亚公司

KEYENCE

KV-RC16BR

16-point Screw Terminal Block, Relay Output, with Repeater Function

Specifications:

Model				KV-RC16BR
General specifications	Vibration resistance	Intermittent vibration	Frequency：5 to 9Hz	Half amplitude: 3.5 mm^*1
			Frequency：9 to 150Hz	Acceleration: 9.8 m/s^2*1
		Continuous Vibration	Frequency：5 to 9Hz	Half amplitude: 1.75 mm^*1
			Frequency：9 to 150Hz	Acceleration: 4.9 m/s^2*1
	Current consumption			At 11.4 V: 390 mA or less, at 26.4 V: 150 mA or less
	Power voltage			Rated voltage: 12 to 24 VDC, supply voltage range: 11.4 to 26.4 VDC
	Operating ambient temperature			0 to +60°C (no freezing)
	Operating ambient humidity			10 to 95%RH(no condensation)
	Ambient temperature for storage			-20 to +75°C
	Approved standards	Overvoltage category		II
		Pollution degree		2
	Storage relative humidity			10 to 95%RH(no condensation)
	Approved standards	CE marking		EMI: EN55011 Class A, EMS: EN61131-2, low voltage directive: EN61131-2^*2
	Operating environment			Minimal amount of dust and corrosive gas present
	Altitude			2000m or less
	Approved standards	FCC		FCC Part15B class A
		UL		UL :UL508 CSA :CAN／CSA22、2 No.14
		ICES		ICES-003 Issue4
	Noise immunity			1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61131-2)
	Withstand voltage			1,500 VAC for 1 minute (between the power supply terminal and the communication terminal, between the power supply terminal and the I/O terminals, and between all the external terminals and the case)
	Enclosure rating			IP2X
	Insulation resistance			100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminal)
	CC-Link specifications			Supported version: 1.10, number of occupied stations: 1, station type: remote I/O station
Output specifications	relay output	Rated voltage		AC240V/DC24V
		Rated output current		240 VAC, 24 VDC, 2 A/output, 4 A/common
		ON resistance		50 mΩ or less
		ON delay time		10ms or less
		Insulation		Relay isolation
		OFF delay time		10ms or less
Weight				approx 290g
^1 Conforms to JIS B 3502 IEC61131-2 Number of sweeps: 10 times respectively in the X, Y, and Z directions, 100 minutes ^2 The only models that are required to support the low voltage directive are the KV-RC16BR and the KV-RC8BXR. Other I/O units are not required to support the low voltage directive.