KEYENCE KV-RC32BT 32-point Screw Terminal Block, Transistor Output

General specifications

Vibration resistance

Intermittent vibration

Frequency：5 to 9Hz

Half amplitude: 3.5 mm^*1

Frequency：9 to 150Hz

Acceleration: 9.8 m/s^2*1

Continuous Vibration

Frequency：5 to 9Hz

Half amplitude: 1.75 mm^*1

Frequency：9 to 150Hz

Acceleration: 4.9 m/s^2*1

Current consumption

At 11.4 V: 150 mA or less, at 26.4 V: 70 mA or less

Power voltage

Rated voltage: 12 to 24 VDC, supply voltage range: 11.4 to 26.4 VDC

Operating ambient temperature

0 to +60°C (no freezing)

Operating ambient humidity

10 to 95%RH(no condensation)

Ambient temperature for storage

-20 to +75°C

Approved standards

Overvoltage category

II

Pollution degree

2

Storage relative humidity

10 to 95%RH(no condensation)

Approved standards

CE marking

EMI: EN55011 Class A, EMS: EN61131-2, low voltage directive: EN61131-2^*2

Operating environment

Minimal amount of dust and corrosive gas present

Altitude

2000m or less

Approved standards

FCC

FCC Part15B class A

UL

UL :UL508
CSA :CAN／CSA22、2 No.14

ICES

ICES-003 Issue4

Noise immunity

1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61131-2)

Withstand voltage

1,500 VAC for 1 minute (between the power supply terminal and the communication terminal, between the power supply terminal and the I/O terminals, and between all the external terminals and the case)

Enclosure rating

IP2X

Insulation resistance

100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminal)

CC-Link specifications

Supported version: 1.10, number of occupied stations: 1, station type: remote I/O station

Output specifications

transistor output

Output

Transistor output (sink type)

Operating load voltage range

DC10.2 to 26.4V

Output unit external power supply

Rated load voltage

DC12/24V

Output load current

0.5 A/output, 5 A/unit (total)^*3

Leaked current at OFF

0.1mA or less

Maximum decreased voltage at ON

0.3 V (typ.) or less, 0.6 V (max.) or less

Output response time (OFF -> ON)

0.1ms or less

Output response time (ON -> OFF)

1.0ms or less

Insulation

Photocoupler isolation

Weight

approx 250g

^*1 Conforms to JIS B 3502 IEC61131-2
Number of sweeps: 10 times respectively in the X, Y, and Z directions, 100 minutes
^*2 The only models that are required to support the low voltage directive are the KV-RC16BR and the KV-RC8BXR. Other I/O units are not required to support the low voltage directive.
^*3 For only the KV-RC8BXT, this is 4 A/unit (total).