KEYENCE KV-RC32BX 32-point Screw Terminal Block Input-Tamasak (M) Sdn Bhd 京都玉崎马来亚西亚公司

KEYENCE

KV-RC32BX

32-point Screw Terminal Block Input

Specifications:

Model				KV-RC32BX
General specifications	Vibration resistance	Intermittent vibration	Frequency：5 to 9Hz	Half amplitude: 3.5 mm^*1
			Frequency：9 to 150Hz	Acceleration: 9.8 m/s^2*1
		Continuous Vibration	Frequency：5 to 9Hz	Half amplitude: 1.75 mm^*1
			Frequency：9 to 150Hz	Acceleration: 4.9 m/s^2*1
	Current consumption			At 11.4 V: 160 mA or less, at 26.4 V: 80 mA or less
	Power voltage			Rated voltage: 12 to 24 VDC, supply voltage range: 11.4 to 26.4 VDC
	Operating ambient temperature			0 to +60°C (no freezing)
	Operating ambient humidity			10 to 95%RH(no condensation)
	Ambient temperature for storage			-20 to +75°C
	Approved standards	Overvoltage category		II
		Pollution degree		2
	Storage relative humidity			10 to 95%RH(no condensation)
	Approved standards	CE marking		EMI: EN55011 Class A, EMS: EN61131-2, low voltage directive: EN61131-2^*2
	Operating environment			Minimal amount of dust and corrosive gas present
	Altitude			2000m or less
	Approved standards	FCC		FCC Part15B class A
		UL		UL :UL508 CSA :CAN／CSA22、2 No.14
		ICES		ICES-003 Issue4
	Noise immunity			1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61131-2)
	Withstand voltage			1,500 VAC for 1 minute (between the power supply terminal and the communication terminal, between the power supply terminal and the I/O terminals, and between all the external terminals and the case)
	Enclosure rating			IP2X
	Insulation resistance			100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminal)
	CC-Link specifications			Supported version: 1.10, number of occupied stations: 1, station type: remote I/O station
Input specifications	24 V mode	Input maximum rating		DC26.4V
		Input voltage		DC24V approx 5.3mA
		Minimum ON voltage		19V
		Minimum ON current		-
		Maximum OFF voltage
		Maximum OFF current		2.0mA
		Input impedance		4.3 kΩ
		Insulation system		Photocoupler isolation
		Input time constant (switching method)		· 0.2 ms · 1.5 ms · 10 ms
	12 V mode	Input maximum rating		DC26.4V^*3
		Input voltage		DC12V approx 2.5mA^*3
		Minimum ON voltage		3.0V^*3
		Minimum ON current		-^*3
		Maximum OFF voltage		1.0V^*3
		Maximum OFF current		-^*3
		Input impedance		4.3 kΩ^*3
		Insulation system		Photocoupler isolation^*3
		Input time constant(switching method)		· 0.2 ms · 1.5 ms · 10 ms
	5 V mode	Input maximum rating		DC26.4V^*4
		Input voltage		DC5V approx 0.9mA^*4
		Minimum ON voltage		2.5V^*4
		Minimum ON current		-^*4
		Maximum OFF voltageｘ		0.8V^*4
		Maximum OFF current		-^*4
		Input impedance		4.3 kΩ^*4
		Insulation system		Photocoupler isolation^*4
		Input time constant(switching method)		· 0.2 ms · 1.5 ms · 10 ms
Weight				approx 250g
^1 Conforms to JIS B 3502 IEC61131-2 Number of sweeps: 10 times respectively in the X, Y, and Z directions, 100 minutes ^2 The only models that are required to support the low voltage directive are the KV-RC16BR and the KV-RC8BXR. Other I/O units are not required to support the low voltage directive. ^3 In 12 V mode, only the KV-RC8BXT and KV-RC16BXT are selectable. ^4 In 5 V mode, only the KV-RC16BX, KV-RC32BX, and KV-RC8BXR are selectable.