KEYENCEKV-RC4ADAnalog Input Unit (4-channel)Specifications:ModelKV-RC4ADGeneral specificationsVibration resistanceIntermittent vibrationFrequency：5 to 9HzHalf amplitude: 3.5 mm*1Frequency：9 to 150HzAc
KEYENCE
KV-RC4AD
Analog Input Unit (4-channel)
Specifications:
Model | KV-RC4AD | |||
General specifications | Vibration resistance | Intermittent vibration | Frequency：5 to 9Hz | Half amplitude: 3.5 mm*1 |
Frequency：9 to 150Hz | Acceleration: 9.8 m/s2*1 | |||
Continuous Vibration | Frequency：5 to 9Hz | Half amplitude: 1.75 mm*1 | ||
Frequency：9 to 150Hz | Acceleration: 4.9 m/s2*1 | |||
Current consumption | 210mA | |||
Power voltage | 24 VDC ± 10% | |||
Operating ambient temperature | 0 to +60°C (no freezing) | |||
Operating ambient humidity | 10 to 95%RH(no condensation) | |||
Ambient temperature for storage | -20 to +75°C | |||
Approved standards | Overvoltage category | I | ||
Pollution degree | 2 | |||
Storage relative humidity | 10 to 95%RH(no condensation) | |||
Approved standards | CE marking | EMI ：EN55011 Class A | ||
Operating environment | Minimal amount of dust and corrosive gas present | |||
Altitude | 2000m or less | |||
Approved standards | FCC | FCC Part15B class A | ||
UL | UL ：UL508 | |||
ICES | ICES-003 Issue4 | |||
Noise immunity | 1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61131-2) | |||
Withstand voltage | 1,500 VAC for 1 minute (between the power supply terminal and the communication terminal, between the power supply terminal and the I/O terminals, and between all the external terminals and the case) | |||
Enclosure rating | IP2X | |||
Insulation resistance | 50 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the I/O terminal) | |||
CC-Link specifications | Supported versions: 2.00, 1.10; number of occupied stations: 1 station ×2 with version 2.00, 2 stations with version 1.10; station type: remote device station | |||
Performance specifications | Conversion speed | 200 µs/ch | ||
Conversion precision | Voltage: ±0.2% of F.S. at 25°C ± 5°C, voltage: ±0.2% of F.S. between 0 and 60°C, current: ±0.2% of F.S. at 25°C ± 5°C, current: ±0.2% of F.S. between 0 and 60°C | |||
Isolation mode | Photocoupler, non-isolated channels | |||
Analog input, general-purpose I/O specifications | Analog input range (resolution) | Voltage: -10 to 10 V (0.83 mV, 1/24000), 0 to 10 V (0.83 mV, 1/12000), -5 to 5 V (0.42 mV, 1/24000), 0 to 5 V (0.42 mV, 1/12000), 1 to 5 V (0.42 mV, 1/9600); current: 0 to 20 mA (1.67 µA, 1/12000), 4 to 20 mA (1.67 µA, 1/9600)Inputs: | ||
Number of analog inputs | 4Inputs: 4, Output: - | |||
Performance specifications | Input resistance | Voltage: 1 MΩ,*2 current: 250 Ω | ||
Analog input, general-purpose I/O specifications | Input method | Differential input | ||
Performance specifications | Absolute max. input | Voltage: ±15 V, current: 30 mA | ||
Analog input, general-purpose I/O specifications | General-purpose (trigger) input | Input signal: NPN open collector No-voltage contact signal Maximum voltage when product turned on: 0.8 V or less Maximum current when product turned off: 0.1 mA or less Isolation method: photocoupler isolation | ||
General purposeoutput | Output format: transistor (NPN) Rated load: 24 VDC, 0.5 A Leakage current when product turned off: 100 µA or less Residual voltage when product turned on: 0.8 V or less Response time: 20 µs or less when switched from off to on, 200 µs or less when switched from on to off Isolation method: photocoupler isolation | |||
Weight | approx 200g | |||
*1 Conforms to JIS B 3502 IEC61131-2 | ||||